Silver Copper
Ionization Test Kits
Some water treatment systems use electricity to produce copper and silver ions that can kill bacteria (including Legionella) in hot and cold-water systems. These systems are becoming more popular.
Silver concentration should be at least 20 ppb or higher if the water is hard.
Installers of ionization systems should follow the rules on how much copper and silver they can add to the water (The Water Supply (Water Quality) Regulations), and check the local water quality.
The hardness and pH of the water can affect how well the copper and silver ions can kill bacteria.
You also need enough copper ions to work with the silver ions.
To test the water, you need to add a reagent sachet to 50 ml of the water sample, filter it through a small membrane, and compare the color of the membrane with a color chart.
The test is quick and easy, and it helps you to adjust the water conditions if needed. You should do this test regularly for the main outlets and some of the other taps.
This is the easiest, fastest, and most accurate tool for measuring silver ion on the market.
It uses the highly accurate span calibration method, which gives better results than conventional silver ion meters.
Copper HR
Colorimeter
Some water treatment systems use electricity to produce copper and silver ions that can kill bacteria (including Legionella) in hot and cold-water systems. These systems are becoming more popular.
Silver concentration should be at least 20 ppb or higher if the water is hard.
Installers of ionization systems should follow the rules on how much copper and silver they can add to the water (The Water Supply (Water Quality) Regulations), and check the local water quality.
Silver Iron
Photometer
If you want to measure high levels of copper in water, the Copper HR Colorimeter is a great choice. It is a device that gives you accurate results in a simple and affordable way.
Unlike chemical tests, which can be messy and unreliable, the Colorimeter uses a scientific method that is approved by the EPA.
The method works by mixing a reagent with the water sample, which makes the water turn purple if it has copper. The more copper there is, the darker the purple color will be.
The Colorimeter then measures the color intensity and tells you how much copper is in the water.
ordering
Information
WTK-CT-80006
Silver (Free) Ionisation Test Kit
Range: 10 – 100 ppb
No. of tests: 100
WTK-CT-85023
Silver Ion Photometer
Range: 0.0 – 0.2 ppm (0-200 ppb)
Resolution: 0.01 ppm
Accuracy: +/- 2%
WTK-CT-80050
Copper Comparator Test Kit 0-1 ppm
Range: 0-1 ppm
No. of tests: 100
WTK-CT-80049
Copper LR Colorimeter 0-5 ppm
Range: 0-5 ppm
Resolution: 0.01 ppm
Accuracy: +/- 5%
WTK-CT-85021
Silver (Free) Ionisation Consumables Pack
No. of tests: 100
WTK-CT-85024
Silver Ion Photometer Calibration Kit
WTK-CT-85025
Silver Ion Photometer Reagent Kit
No. of tests: 100: +/- 2%